III- 44
C
O
A
Form "C" contact configuration
(contacts shown in normal standby
condition; transfer for operated
condition).
NOTES:
1.) Units to be installed in accordance with the
National Electrical Code and / or local
electrical codes.
2.) Terminal block will accept a maximum of
#14 AWG wiring or .260" spade terminals.
Terminal block screw size is #6-32.
Trouble contacts for power limited source
rated 1A. @ 28 V.D.C., resistive.
Not supervised
General alarm contacts for power limited
source rated 5A. @ 30 V.D.C. / V.A.C.
Not supervised
To Next Page
Loading...
