To Next PageTo Next PageWhy is the System Trouble LED and Ckt Disabled LED lit on my Faraday FireWatch 400 Fire Alarms?
The System Trouble LED and Ckt Disabled LED might be illuminated on your Faraday Fire Alarms due to a disabled IDC, a disabled NAC, or a disabled city tie.
What does it mean if the System Ground LED is lit on Faraday FireWatch 400 Fire Alarms?
If the System Ground LED is lit on your Faraday Fire Alarms, it indicates that one or more external field connections are grounded.
Why is the System Power fault LED lit on my Faraday FireWatch 400?
The System Power fault LED on your Faraday Fire Alarms might be lit because no battery is connected, or the battery fuse is blown.
Overview of the 13400 Fire Alarm Control Unit and its purpose.
Details minimum, optional configurations, and additional devices for the control unit.
Explains general operational settings, functions, and circuit behaviors of the unit.
Provides technical details, environmental ratings, and electrical specifications for the unit.
Describes how the system indicates and responds to an alarm condition.
Details system indications and silencing procedures for trouble and supervisory conditions.
Procedures for conducting system tests and performing routine maintenance.
Covers zone disabling, quick test procedures, and panel switch operations.
Procedures for resetting alarms and contact details for service support.
Covers parts supplied, general installation, panel location, and enclosure mounting.
Details surface/semi-flush mounting and control unit setup and jumper settings.
Guides for attaching transformer, installing sub-chassis, AC power, and batteries.
Includes wiring diagrams, circuit checks, and final system operation verification.
Checklist for planning system setup, including zone verification and waterflow settings.
Procedures for temporarily disabling features or zones for maintenance.
Details the function of the standard 8-position DIP switches on the main board.
Lists compatible manual stations, waterflow, and supervisory switches.
Lists compatible 2-wire and 4-wire smoke and heat detectors.
Lists compatible horns, strobes, speakers, and associated devices.
Lists compatible accessory devices, door holders, and relays for auxiliary outputs.
Information on selecting appropriate wire types based on resistance and voltage drop.
Guidance on calculating battery requirements for standby and alarm operation.
Identifies common issues, their probable causes, and relevant indicator lights.
Provides references for installing optional boards like Alarm Relay and City Tie.
General| Brand | Faraday |
|---|---|
| Model | FireWatch 400 |
| Category | Fire Alarms |
| Language | English |
