To Next PageTo Next PageWhat does 'FDLC x EXT EE' mean on Faraday Control Unit?
If the Faraday Control Unit displays 'FDLC x EXT EE', it indicates that the EEPROM of FDLC X is corrupted and requires replacement of the FDLC.
What does it mean if my Faraday Smoke Alarm displays BATT Trouble?
If your Faraday Smoke Alarm displays 'BATT Trouble', it indicates that the battery input is either low or off. Check the battery connection and power level.
What should I do if my Faraday Smoke Alarm shows NACxx Trouble?
If your Faraday Smoke Alarm displays 'NACxx Trouble', it means the NAC xx wiring is either open or shorted. Inspect the wiring for any issues.
What to do if my Faraday Smoke Alarm shows CITY Trouble?
If your Faraday Smoke Alarm shows 'CITY Trouble', it indicates that the Local Energy circuit is open. Check the local energy circuit.
What does DACT Acct Trb mean on my Faraday Smoke Alarm?
If your Faraday Smoke Alarm displays 'DACT Acct Trb', it means there is a DACT account reporting trouble.
What does 'CHARGER SUPV Trouble' mean on my Faraday Control Unit?
If your Faraday Control Unit displays 'CHARGER SUPV Trouble', it indicates that the battery charger voltage is too low. Check the voltage of the battery charger.
What does 'GRD FAULT Trb' mean on Faraday Control Unit?
If the Faraday Control Unit displays 'GRD FAULT Trb', it means the system has detected a positive or negative ground fault. Investigate the system for ground faults.
What to do if Faraday Control Unit displays 'PC Pgmr Trb'?
If your Faraday Control Unit is displaying 'PC Pgmr Trb', this indicates that the control unit is not receiving communication from the PC. Check the connection between the control unit and the PC.
What does LCDxx Not Pgmd mean on my Faraday Smoke Alarm?
If your Faraday Smoke Alarm displays 'LCDxx Not Pgmd', it means the LCD Annunciator xx is not programmed but is responding.
What does LCDxx Trouble mean on my Faraday Smoke Alarm?
If your Faraday Smoke Alarm displays 'LCDxx Trouble', it means the LCD Annunciator xx reports trouble.
Lists restrictions and requirements for the control unit's proper operation.
Section for recording details of the installer.
Section for recording details of the original purchaser.
Overview of the MPC-6000 fire alarm control unit features and components.
Overview of the MPC-7000 fire alarm control unit features and components.
Overview of the RND-2 Remote Network Display features and capabilities.
Lists and describes optional modules for expanding system functionality.
Details on system operation, including standby, alarm, and trouble conditions.
Procedures for lamp test, drill, recall, and alert functions.
Lists all components included in the control unit packages for installation.
Instructions and diagrams for mounting the control unit enclosures securely.
Instructions for connecting the primary AC power supply to the main board.
Guidelines and warnings for installing the 24V battery set for backup power.
Information on customizing control unit programming via the keypad.
Using a computer with CIS-4 software for panel programming.
Overview of maintenance mode functions and access procedures.
Procedure for performing quick system tests on initiating devices.
Data on wire resistance for system wiring calculations.
Guidelines and tables for calculating required battery capacity.
Lists Faraday X1 compatible pull stations, modules, detectors, bases, and accessories.
Lists and describes system trouble conditions and their meanings.
Procedures and intervals for testing and maintaining system batteries.
Explains the function and status indication of panel LEDs, sounder, and buttons.
Details the Positive Alarm Sequence feature for delaying audibles.
Explains the Pre-Signal feature for delaying output activation.
General principles of the MPC networking system and node configuration.
How to configure and use diagnostic printers in the network.
Configuration options for global control of networked panels from RND-2.
Configuration options for the RND-2 to activate functions on networked panels.
General| Brand | Faraday |
|---|---|
| Model | MPC-7000 |
| Category | Fire Alarms |
| Language | English |
