Faraday MPC-7000 - Loop Driver Board(S) Mounting

MPC-6000 / MPC-7000 / RND-2 INSTALLATION, OPERATION AND MAINTENANCE MANUAL
38
Loop Driver Board(s) Mounting – P/N FDLC
 Place the provided standoffs (P/N 375-F943165) in locations shown on the Main Board
(four for the MPC-6000 and eight for the MPC-7000).
 Carefully align connector J1 on the Loop Driver Board with connector J9 on the MPC-6000
Main Board (P/N MPC6-MB or MPC6-MB2) or with connectors J9 and J14 on the MPC-
7000 Main Board (P/N MPC7-MB).
MPC-6000
MPC-7000
Standoffs
375-F943165
FDLC
Loop Driver Boards