Farberware 201627 - Storage and Assembly Instructions; Using the Storage Stand; Blade Attachment Assembly; Chopper Assembly

7
OPERATION
Danger of suocation!
• Packaging materials are not toys. Always keep plastic bags, foils and foam parts
away from babies and children. Packaging material could block airways and
mouth and prevent breathing.
• Clean the appliance thoroughly before using for the first time ( Cleaning and
Maintenance)
USING THE STORAGE STAND
The storage stand can hold the appliance and all accessories when not in use.
• Fold up the storage stand (15) and ensure it locks in its final position with a
noticeable click (ill.
a
).
• Place the accessories into their designated areas (ill.
b
).
NOTE:
- The holder for the appliance is designed to hold the blending base (5) with
attached blade attachment (11).
ASSEMBLY
WARNING:
- Do not connect the appliance to a wall outlet unless it is fully assembled
(ill.
c
).
- The blades are very sharp. Always handle the blade attachment (11) and
the chopping blade (8) with care. Do not touch the blades as this may cause
injuries (ill.
d
).
Blade attachment
• Attach the blade attachment (11) by aligning the coupling (6) onto the blending
base (5) and secure it by turning it counter-clockwise until locked in position with
a noticeable click (ill.
e
).
Chopper assembly
• Place the chopping bowl (9) on a clean, flat and stable surface.
• Remove the chopping bowl lid (7) from the chopping bowl (9) by turning it
counter clockwise and lifting it up when unlocked (ill.
f
).
• Fill the food to be processed into the chopping bowl (9) (ill.
g
).
• Add the chopping bowl lid (7) and lock it by turning it clockwise (ill.
h
).
Immersion Blender_201627_IM_US_V4_170620.indd 7 6/20/17 10:14 AM