Farm King BW150 - User Manual

Questions and Answers

S
suzanne59Aug 3, 2025
Why is my Farm King BW150 wrapping machine working so slowly?
- F
  Felicia MorrisAug 3, 2025
  The wrapping machine might be working slowly due to several reasons. It could be that the hydraulic oil level is low; in this case, check the hydraulic oil level and fill as needed. Another potential cause is a damaged hydraulic hose or loose connection, so inspect all hoses and connections, repairing or replacing them as necessary. A plugged hydraulic oil filter could also be the culprit; try cleaning or replacing the hydraulic oil filter. Finally, the hydraulic pump might be damaged, so check the tractor’s hydraulic system.
A
Anna AlvarezAug 9, 2025
What to do if the rotary chassis of my Farm King BW150 does not rotate?
- J
  Jose WestAug 9, 2025
  If the rotary chassis isn't rotating, it could be due to a broken or loose chain; in this case, replace or tighten the chain. Alternatively, the hydraulic motor might be damaged, so check the engine condition and contact the service agent.
A
Ashley RomeroAug 15, 2025
What to do if the bale does not revolve around its axis on my Farm King Farm Equipment?
- E
  Eileen MartinezAug 15, 2025
  If the bale isn't revolving around its axis, a possible cause is a broken or loose chain. You should replace or tighten the chain to resolve this issue.
W
Wanda IngramAug 20, 2025
Why are the hydraulic cylinders on my Farm King BW150 not holding their position?
- J
  Jonathan SanchezAug 20, 2025
  The hydraulic cylinders may not be holding their position because of worn hydraulic seals in the cylinders. Replacing the seals should solve this problem.
M
Michael HughesAug 27, 2025
How to fix oil leaks from the control unit of my Farm King BW150?
- J
  Justin BakerAug 27, 2025
  Oil leaks from the control unit are likely due to worn seal rings. The solution is to replace the seal rings.