Why is there excessive vibration in my Farm King 1684 Farm Equipment?
If you're experiencing excessive vibration with your Farm King Farm Equipment, ensure that the PTO is connected correctly. Specifically, connect the CV side of the PTO to the implement.
What to do if grain flow is too slow in Farm King 1684 Farm Equipment?
If the grain flow is too slow in your Farm King Farm Equipment, there are a couple of potential causes. First, the discharge gate(s) may not be open enough; try opening them further to increase the flow to the hopper intake auger. Second, the tractor RPM might be set too low; increase the tractor RPM to the proper setting.
How to troubleshoot lights that do not function on Farm King 1684 Farm Equipment?
If the lights on your Farm King Farm Equipment aren't working, start by checking the electrical connection at the tractor to ensure it's secure. Next, inspect the harness or wiring for any broken wires. Finally, check the tractor light circuit for any faults.
What to do if grain flow is too fast in Farm King 1684 Farm Equipment?
If the grain flow is too fast in your Farm King Farm Equipment, it's likely that the discharge gate(s) are open too far. Try closing the gate(s) to reduce the grain flow to the hopper / intake auger.
How to fix Farm King 1684 when the augers cannot start?
If the augers on your Farm King Farm Equipment won't start, there could be a couple of reasons. First, the auger may be plugged or obstructed; in this case, shut off the tractor, disconnect the PTO, and remove the obstruction. Second, there may be a bearing failure; check the bearings and replace them if needed.
General| Brand | Farm King |
|---|---|
| Model | 1684 |
| Category | Farm Equipment |
| Language | English |
Details about the owner, serial number location, and manual storage.
Visual guide to identify different parts of the auger models.
Identification diagrams for 1684, 16104, and 16124 models.
Essential guidelines for safe operation, operator qualifications, and rules.
Precautions to prevent fires related to maintenance, operation, electrical, and fueling.
Defining safe areas around the equipment during operation.
Information on decals and signs on the equipment and their importance.
A form for recording operator and maintenance personnel training.
Pre-operation checks, break-in, tractor requirements, and drawbar adjustment.
Procedures for safely getting on and off the operator's seat.
Detailed steps for hitching the auger to the tractor, including PTO and hydraulic connections.
Instructions for adjusting flow control, placing the auger, and unloading operations.
Requirements and procedures for safely transporting the auger.
Common problems, their causes, and corrective actions for the auger.
Recommended intervals for daily, weekly, semi-annual, and annual maintenance tasks.
Procedures for lubricating components and checking gearbox/axle fluids.
Tasks like cable inspection, tension adjustment, truss inspection, and wheel torque.
Procedures for equipment storage and applying safety decals.
Overview of parts identification and how to contact dealers for information.
Diagrams and parts lists for the input box assembly.
Diagrams and parts lists for the undercarriage assembly.
Diagrams and parts lists for the bridging components.
Diagrams and parts lists for the lift arm assemblies.
Diagrams and parts lists for auger tubes and sections.
Diagrams and parts lists for the intake auger.
Diagrams and parts lists for the hopper, its flighting, and lift arm.
Diagrams and parts lists for light kits and hopper movers/winches.
Wiring diagrams for the auger's lighting system.
Detailed measurements and diagrams for different auger models.
Key performance metrics like PTO speed, auger size, and weights.
Torque specifications for metric and imperial hardware.
Torque values and guidelines for hydraulic fittings and hoses.
The primary limited warranty covering manufactured parts and components.
Warranty terms for genuine Farm King replacement parts.
Exclusions from warranty coverage, including misuse and normal wear.
Information on warranty repair labor costs and dealer authorization.
Conditions for warranty coverage, including product registration.
To Next Page
