Farmi Forest CH 160 User Manual

Farmi Forest Corporation
Ahmolantie 6
FIN-74510 Iisalmi, Finland
Tel. +358 (0)17 83 241
Fax. +358 (0)17 8324 372
ZZZIDUPLIRUHVW¿
CH 160
CH 160T i=2,1
OPERATION, MAINTENANCE
AND SPARE PARTS MANUAL
READ THIS OPERATION AND MAINTENANCE MANUAL CAREFULLY
BEFORE USING THE MACHINE
FROM MACHINE:
03513920 I-EN-151107-ER
CHIPPER

Farmi Forest CH 160 Specifications

General

Brand	Farmi Forest
Model	CH 160
Category	Chipper
Language	English

Summary

WARNINGSYMBOLS IN THIS MANUAL

DANGER! Symbol

Indicates imminent danger causing serious personal injury or death.

WARNING! Symbol

Indicates danger causing personal injury.

SAFETY INSTRUCTIONS

General Safety Precautions

Read and follow all safety instructions before operating the machine.

Starting Procedures

Familiarize yourself with controls and danger zones before starting.

OPERATION

General Operation Guidelines

Be aware of abnormal circumstances and safety devices during operation.

MAINTENANCE

SAFETY INSTRUCTIONS FOR HYDRAULIC CIRCUITS

ASSEMBLY INSTRUCTIONS

SHORTENING THE PTO SHAFT

MOUNTING ON THE WILLE 445 ADAPTER

MOUNTING ON THE BOBCAT ADAPTER

INSTALLING THE HD 100

INSTALLING THE 160T i=2.1 BELT TRANSMISSION

OPERATING THE CHIPPER

Inspections Prior to Operation

Starting the Chipper

Stopping a Tractor-Driven Chipper

Stopping a Hydraulic Motor Driven Chipper

Chipping Process

PERIODIC MAINTENANCE

Periodic Inspections

LUBRICATING THE BEARINGS

LUBRICATING THE PTO SHAFT

KNIFE AND ANVIL MAINTENANCE

Opening and Removing the Upper Chamber

REMOVING THE KNIVES

SHARPENING THE KNIVES

REMOVING THE ANVILS

SHARPENING THE ANVILS

Installing Knives and Anvils

Adjusting Knife-to-Anvil Clearance

REPLACING THE SPLINED SHAFT

REPLACING THE BEARING

ADJUSTING THE BEARING CLEARANCE

BELT TRANSMISSION CH160T i=2,1

BEARING SYSTEM

MOUNTING FRAME

FEED CHUTE F160

LÖSI EPMS 100 C

HD100

ADAPTER WILLE

ADAPTER BOBCAT