Farmnavigator G7 - Table of Contents

4.13 How to activate the lifetime
VT and TC license 78
4.14 How to activate the lifetime Navigation
license (only for G7 Terminal) 78
4.15 Carry out a job with ISOBUS
equipment, ISOXML map,
variable rate and section control 78
4.16Using“Planter”tocreateelds
planting layout 79
5. Importing and exporting data 83
5.1Downloadajobandviewitintheo󰀩ce83
5.2Importtheeldboundariesin
KMZ format 84
5.3ImportingamapinSHPleformat 87
5.3.1 Create a boundary in
SHPleformat 90
5.4ImportaleinISOXMLformat 91
5.5 Exporting the task map to ISOXML 92
6. Other functions 94
6.1NTRIPCongurationfor
All in One RTK 94
6.1.1GPSxcheck 94
6.1.2NTRIPConguration 94
6.2NTRIPCongurationforTurtleRTKor
third-party receivers 95
6.2.1GPSxcheck 95
6.2.2NTRIPConguration 96
6.3 G7 software updates 97
6.3.1 Software Update via WiFi (G7 Plus,
G7 Terminal and G7 Iso) 97
6.3.2 Software Update via USB 98
6.4 Video camera 98
6.4.1 Type of supported cameras 98
6.4.2 Connect a video camera 98
6.4.3 Display mode for Video camera 99
6.5 Road navigation (optional) 99
6.6 Activate a virtual NMEA output on the
“Generic” port 100
6.7 Activate the Demo mode 101
6.8GNSSReceiverrmwareupdate 103
7. Contacts/Customer Support 104
8. Appendix A 105
9. Appendix B 106
Analytic Index 107