Farsun FG2600 - Insert String G3 Setting; Insert String G4 Setting; FN1 Substitution String Setting

56
Insert String G3 Setting
G3 is also used as the string to be replaced when the replace function is
enabled.
Scan Inert String G3˄0~16 Charsˈ2 Digits /Char˗00~FF˗ 00*˅
Scan the Position of G3˄2 Digits˗00~99˗ 00*˅
Insert String G4 Setting
G4 is also used as the string to replace G3 in a bar code data when the
replace function is enabled.
Scan Inert String G4˄0~16 Charsˈ2 Digits /Char˗00~FF˗ 00*˅
Scan the Position of G4˄2 Digits˗00~99˗ 00*˅
FN1 substitution string setting
The FN1 character (0x1D) in an UCC/EAN128 barcode, or a Code 128
barcode, or a GS1 DataBar barcode can be substituted with a defined string.