63
Wireless Channel
When there are more than one host work in the same Space, every host has
to work in different channel. Channel is set as follows:
1. Open a Notepad or other text editor.
2. Press the "Channel Settings button" to change the channel of a host, and
the channel NO will be displayed in the screen.
Scanner ID
Set the Scanner ID˄2 Digits˗00~99˗00*˅
Add Scanner ID as Prefix
If this item is enabled, the scanner will add its ID as prefix of every
barcode. E.g. When scan the bar code ³´LIWKH,'RIWKHVFDQQHULV
³´DQGWKHRXWSXWEDUFRGHGDWDZLOOEH ³,'´
NOTE: The ID of a scanner can be set manually or assigned by the host
DXWRPDWLFDOO\(YHU\VFDQQHUZRUNZLWKWKHVDPH+RVWFDQ¶WEHZLWKWKH
same ID.
Enable Add Scanner ID as Prefix Disable Add Scanner ID as Prefix *
To Next Page
Loading...