4
Battery Status... 59
Programming with Parameter
It is need to scan more than one setting barcode to program the scanner
with parameter.
Program Parameters
Notice:
1. Please carefully read the User Manual before using the barcode scanner.
2. All software, including firmware, furnished to the user is on a licensed basis.
3. The right is reserved to make changes to any software or product to improve
reliability, function, or design.
4. The material in this manual is subject to change without notice.
. when powered on, the wireless function will automatically send signal
each 11seconds. For your health, turn it off is recommended when not use.
5
To Next Page
Loading...