H0.3 Manoeuvres to unfold the crane "C" into a working condition
H0.4 Manoeuvres to fold the crane "C" into the rest condition
H1 MANOEUVRES OF THE CRANE LOADS
H1.1 Lifting moment limiting device “intelligent type”
H1.2 Lifting moment limiting device for two working sectors (optional)
H1.3 Control panels
H1.4 Reactivation button of crane functions with standard distributor in the
absence of the electric power
H1.5 Emergency exclusion screw of the lifting moment limiting device
(crane with standard distributor)
H1.6 Emergency tap lever of the lifting moment limiting device
(crane with Danfoss distributor)
H1.7 Rotation limiting device
H2 MANOEUVRES OF THE CRANE LOADS
H2.1 Load limiting device
H2.2 Lifting moment limiting device “intelligent type” (optional)
H2.3 Reactivation button of crane functions with standard distributor in the
absence of the electric power
H2.4 Emergency exclusion screw of the lifting moment limiting device
(crane with standard distributor)
H2.5 Emergency tap lever of the lifting moment limiting device
(crane with Danfoss distributor)
L0 USE OF IMPLEMENTS
L0.1 Hydraulic connections for implements - supplementary hoses
L1 MANUAL EXTENSIONS
L2 CONTROLS TO OPERATE THE HYDRAULIC IMPLEMENTS OF THE CRANE
L3 WINCH
L3.1 Winch for crane
L3.2 Winch for crane
L4 HYDRAULIC JIBS
L4.1 Identification of the hydraulic jib
L4.2 Nomenclature of the hydraulic jib
L4.3 Manoeuvres to unfold the jib in working condition
L4.4 Manoeuvres to fold the jib in rest condition
L4.5 Operations to remove the hydraulic jib from the crane
L4.6 Operations to mount the hydraulic jib on the crane
M0 MAINTENANCE INSTRUCTIONS
M0.1 At the end of every working day
M0.2 After the first 40 hours use
M0.3 After every working week
M0.4 After every 500 working hours
M0.4 Complete overhaul of the crane
N0 TABLE OF HYDRAULIC OIL and lubricants characteristics
P0 POSSIBLE FAULTS
P0.1 Operations which can be carried out by the user
P0.2 Operations to be carried out by a service center
R0 INSTRUCTION AND WARNING PLATES
S0 HYDRAULIC SCHEMATICS FOR CRANE
S1 HYDRAULIC SCHEMATICS FOR CRANE
T0 ELECTRIC SCHEMATICS FOR CRANE
T1 ELECTRIC SCHEMATICS FOR CRANE
V0 CAPACITY PLATES FOR CRANE WITH
LIFTING MOMENT LIMITING DEVICE
V1 CAPACITY PLATES FOR CRANE WITHOUT
LIFTING MOMENT LIMITING DEVICE
2
To Next Page
Loading...