Fassi F1000A User Manual

1
FASSI CRANE
F1000A/F1100AXP.28
use and maintenance
FROM SERIAL NUMBER
*
1119
*
INDEX
1 INTRODUCTION
2 CLASSIFICATION OF THE CRANE MODEL
2.1 Generality
2.2 Hydraulic jibs
2.3 Technical data
3 CAPACITY PLATES
3.1 Generality
3.2 Capacity plates with lifting moment limiting device
4 HYDRAULIC SCHEMATICS
5 ELECTRIC SCHEMATICS
6 SAFETY NORMS
7 WARNING AND INSTRUCTIONS
7.1 Generality
7.2 Before operating
7.3 During operation
7.4 At the end of the operation (Prior to driving the vehicle)
7.5 Residual risks
8 IDENTIFICATION OF THE CRANE MODEL
8.1 Generality
8.2 Crane mark
9 CRANE NOMENCLATURE
9.1 Controls for crane and outriggers through push-button panel of the radio remote control
10 NOMENCLATURE OF THE SAFETY AND PROTECTION DEVICES
10.1 Controls for crane and outriggers through push-button panel of the radio remote control
11 SUPPLEMENTARY BEAMS
11.1 Generality
11.2 Identification of the supplementary beams
12 TILTABLE OUTRIGGER RAMS (not available)
13 MANOEUVRES AND CONTROLS TO STABILIZE THE VEHICLE
13.1 Generality
13.2.2 Functions of control levers for stabilization with radio-remote control
13.3 Controls to stabilize the vehicle
13.3.1 Crane with fixed or manually tiltable supports for outrigger rams
13.3.2 Crane with hydraulic tiltable supports (WITH CHAIN) for outrigger rams
14 CONTROLS TO OPERATE THE CRANE
14.1 Generality
14.2 Radio-remote control
14.2.1 Use of the radio-remote control
Edition 15.04.2008
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com

Fassi F1000A Specifications

General

Brand	Fassi
Model	F1000A
Category	Construction Equipment
Language	English

Summary

3 CAPACITY PLATES

3.2 Capacity plates with lifting moment limiting device

Explains capacity charts for cranes equipped with load limiting devices.

6 SAFETY NORMS

7 WARNING AND INSTRUCTIONS

7.1 Generality

General safety and operational instructions for crane use.

7.2 Before operating

Pre-operation checks and essential safety precautions before starting work.

7.3 During operation

Guidelines for safe operation of the crane, including stabilization and load handling.

7.4 At the end of the operation (Prior to driving the vehicle)

Procedures for securing the crane after operation before driving the vehicle.

7.5 Residual risks

Identifies potential hazards and residual risks associated with crane operation.

13 MANOEUVRES AND CONTROLS TO STABILIZE THE VEHICLE

13.1 Generality

Explains the role of outriggers in stabilizing the crane and ensuring vehicle safety.

13.2.2 Functions of control levers for stabilization with radio-remote control

Describes how to use radio remote control levers for crane stabilization functions.

13.3 Controls to stabilize the vehicle

General controls for stabilizing the vehicle using outrigger systems.

14 CONTROLS TO OPERATE THE CRANE

14.2 Radio-remote control

Information on using the radio remote control system for crane operation.

14.2.1 Use of the radio-remote control

Instructions on how to properly use the radio remote control system.

14.3 Emergency station from the column (if accessible) or Control station (version with load limiting device) (not available)

Describes emergency control stations and their operation procedures.

14.4 Manoeuvres to unfold the crane into a working condition

Step-by-step guide to unfolding the crane into its working configuration.

14.5 Manoeuvres to fold the crane into the rest condition (see Plate DE4452A)

Instructions for folding the crane into its rest position safely.

16 MANOEUVRES OF THE CRANE LOADS

16.1 Generality

16.2 Lifting moment limiting device "EVOLUTION" (LMEV) and automatic dynamic control (ADC)

Details the EVOLUTION LMEV and ADC system for load control and safety.

16.3 Control panels of the lifting moment limiting device (if fitted)

Describes the different types of control panels for the load limiting device.

16.4 Load handling

General guidance on safe load handling procedures with the crane.

16.4.1 "Block due to overload condition"

Procedures for handling crane block situations caused by overload conditions.

16.4.3 "Lifting block" (Prolink)

16.5 Lifting moment limiting device for two working sectors

16.8 Diagnostic: alarms and warnings

Information on crane diagnostics, alarms, and warning signals.

16.8.1 Emergency control station on the column and exclusion tap lever

Describes emergency controls and the exclusion tap lever function.

16.9 XP DEVICE

16.9.1 Activation and instructions for use of the XP/CR device

Details on activating and using the XP/CR device for enhanced crane performance.

16.10 "JDP" FUNCTION (if fitted)

20 HYDRAULIC JIBS

20.8 Crane with lifting moment limiting device and "Prolink" (if fitted)

Describes the crane's operation with the Prolink safety device.

22 MAINTENANCE INSTRUCTIONS

22.1 Generality

22.3 After every 8 working hours or at the end of every working day

Daily maintenance checks for safety devices, oil levels, and components.

22.4 After every 40 working hours or after every working week

22.5 After every 100 working hours or more frequently in case of more intensive utilisation

22.6 After every 500 working hours or after every 6 working months

22.7 After every 1000 working hours or after every working year

Annual maintenance tasks including washing, function testing, and inspections.

24 POSSIBLE FAULTS

24.1 Generality