Fassi F 80A.23 - 3 CAPACITY PLATES; 3.1 Generality; 3.1-1 Capacity plates with lifting moment limiting device

3 CAPACITY PLATES
3.1 Generality
The represented plates refer to the nominal design capacities.
(!) WARNING (!)
If the capacities are downgraded or partially reduced (e.g. sector in front of
vehicle cab) capacity plates must be applied in line with the final test figures.
3.1-1 Capacity plates with lifting moment limiting device
3
CAPACITY PLATES
F 80A.23
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com