EasyManua.ls Logo

Fast System Fastpress - Important Safety Instructions

Fast System Fastpress
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
IMPORTANT SAFETY INSTRUCTIONS
When using your Press basic safety precautions should always
be observed, including the following:
1. Please read all instructions before using your Press.
2. Use the Press only for its intended use.
3. This Press Iron is intended for household use only.
4. Don’t immerse any part of the press in water or other liquids.
5. The press should always be turned to OFF (position 0 on the
on/off switch) before plugging or unplugging from electrical
outlet. Never pull cord to disconnect from the power socket.
6. Do not operate press with a damaged cord or if the press has
been dropped or damaged. To avoid the risk of electric shock,
do not disassemble the press, take it to a qualified serviceman
for examination and repair.
7. Close supervision is necessary for any appliances being used
near children. Do not leave press unattended while connected
to a power supply, or while hot.
8. Burns can occur from touching hot metal parts.
9. To avoid a circuit overload, do not operate another appliance
on the same socket.
10. If an extension cord is absolutely necessary, use a cord which
has the current carrying capacity. Cord rated for less amperage
may overheat.
11. If the main cord should be damaged, it should only be changed
by a qualified service.
12. It is important that the press be grounded /earthed
PLEASE KEEP THESE INSTRUCTIONS