New Classic Edition 2.0
FASTTEL Klipsenstraat 18A 9160 Lokeren
Tel : + 32 (0) 9 244 65 20 FAX:+ 32 (0) 9 244 65 29 Email:
info@fasttel.be
Web :
WWW.FASTTEL.BE
2. Programmation code
You can only change the settings which you will find further on in this guide after you have
entered the programmation code.
How :
Call the extension number or phone number on which the Wizard is connected.
The Wizard will pick up with de DTMF tones or the recorded speech message (optional)
- enter *1996* on the keypad of your phone
After the correct entering of the digits, the Wizard will answer with 3 tones.
Eg. * 1 9 9 6 * teet teet tuut
The Wizard is now ready to accept your settings.
Remark : The Wizard will quit the line if no DTMF codes are received within 10 seconds. This will first be confirmed by 2
beeps (error).
Each correct programmation code will be confirmed by one beep.
Each incomplete or incorrect code will be confirmed by 2 beeps (error).
Eg. Programmation code 710. You do nothing, 10 seconds later beep beep and the Wizard quits the line.
3. Calling
You can call the Wizard for :
Direct communication of programming. The Wizard answers automatically after a
preprogrammed number of rings. On delivery the Wizard is set to 1 ring. You can change this
setting.
How ?
Code 84XX XX is the number of rings before the Wizard will answer.
00 stands for 255 rings
01 stands for one ring, 02 for two, 99 for ninety-nine.
Remark : automatic calling: let ring at least one time and not more the 3 times. You put the
phone down and call back within 20 seconds.
New Classic Edition 2.0
FASTTEL Klipsenstraat 18A 9160 Lokeren
Tel : + 32 (0) 9 244 65 20 FAX:+ 32 (0) 9 244 65 29 Email:
info@fasttel.be
Web :
WWW.FASTTEL.BE
10
4. Programmation codes Wizard
In the table below you find all the programmation codes to personalize the behavior of the
Wizard. (only after forming *1996* by telephone during conversation)
Code 530 Load default values factory settings
Default table
DESCRIPTION CODE default
Calling 84XX 01
1
destination 711
empty#
Redial - occupied/repeat n/y 660/661 661
Number of ring next destinat. 82XX 10
Number X repeat when occup. 83XX 05
2
day number active 650/651 650
Day/Night setting
# 8X
Day
DTMF/Impulse dialling 600/601 600
Password active contact n/y 550/551 550
Password for security 85XXXX 1111
End conversation code 4xx 09
(Door) contact code 2xx 02
Maximum conversation time 80XX 08
Impulse / toggle contact 610/611 610
Time duration contact 81XX 10
Steps 5 sec./100msec. 520/521 521
Setting speaker/micro 88XX 07
ID code 700 1111#
DTMF/speech active yes/no 670/671 671
# after ID no/yes
500/501 500
DTMF/Speech 1 on line 560/561 560
DTMF/Speech 2 on LS 570/571 571
DTMF/speech active no/yes 670/671 671
Door station transparent n/yes 540/541 540
Waiting for dialling tone n/y 620/621 621
Activate relay FT8SW with short code 2 936ab 936*1
Codes keypad 920miaaxxxx# empty
Conversation acceptance 1*0/1*1 1*0
Doorcontact after pushing y/n 510/511 510
Complete reset of Wizard 530 530
To Next Page
Loading...
Need help?
General
