The Fasttel FT600(K)SIP is a SIP-compliant, hands-free video door phone designed for secure access control and monitoring. It allows users to verbally and visually confirm visitors' identities, providing peace of mind by enhancing facility security. This device can be integrated with Fasttel indoor monitors for remote access control and monitoring, enabling communication with visitors via audio and video calls, and allowing users to unlock the door as needed.
Function Description:
The Fasttel FT600(K)SIP door phone serves as a comprehensive door entry system. It supports both IP and SIP calls, allowing for flexible communication setups. The device can be configured for various call features, including speed dial, auto-answer, and multicast. It also integrates with third-party devices via Wiegand and HTTP API for broader system compatibility. Security features include tamper alarms, client certificates, and various notification settings (email, FTP, SIP call, HTTP URL) for events like unanswered calls or security breaches. The device also supports auto-provisioning for batch configuration and firmware upgrades, simplifying deployment and maintenance.
Important Technical Specifications:
- Model: FT600(K)SIP
- Button: Physical Numeric Keypad (for FT600KSIP)
- Housing Material: Brushed black Aluminum/Glass
- Camera: 2 Mega pixels, automatic lighting
- Relay In: 2
- Relay Out: 2
- RS485: Yes
- PoE: Yes
- RAM: 128MB
- ROM: 16MB
- Card Reader: No
- IP Rating: IP65
- IK Rating: X
- Wall Mounting Dimension: 216x116x36mm
- Recess Flush Mounting Dimension: 202x102x31mm
- Supported Temperature Range: 14°F to 112°F (-10°C to 45°C)
- ONVIF Support: Onvif 18.04 profiles
- Audio Codecs: PCMU, PCMA, G729, G722 (64 kbit/s for PCMA/PCMU/G722, 8 kbit/s for G729)
- Video Codecs: H264 (supports various resolutions like QCIF, QVGA, CIF, VGA, 4CIF, 720P, and bitrates from 128 kbps to 4096 kbps)
Usage Features:
- Accessing the Device: The device's IP address can be obtained via an IP scanner on the LAN. For FT600SIP, holding the call button for 5 seconds after power-up will announce the IP address. For FT600KSIP, pressing "3258" after power-up will announce the IP address. The web interface is accessed via a browser using the device's IP address, with default credentials "admin" and "Fasttel123!".
- Language and Time Setting: The web interface allows configuration of the display language (default English) and time zone. NTP server synchronization is supported for automatic time and date updates.
- LED Setting: Infrared LED for dark environments can be configured, with adjustable photoresistor settings to enable/disable the LED based on ambient brightness. Keypad LED lighting can also be enabled/disabled and scheduled for specific time spans to conserve power.
- Volume and Tone Configuration: Microphone, speaker, tamper alarm, and keypad volumes are adjustable. Users can upload custom ringback and open door tones.
- Network Settings: Supports DHCP and Static IP settings. RTP port range configuration (1024-65535) is available for data transmission. NAT settings allow for maintaining connection with remote SIP servers via heartbeat messages. SNMP (Simple Network Management Protocol) can be enabled for network monitoring, with configurable port and trusted IP addresses. VLAN settings allow for logical network segmentation to enhance security and performance. TR069 is supported for remote management and auto-configuration.
- Intercom Call Features:
- IP Call: Direct IP calls can be made by entering the IP number on the device. Auto-answer for direct IP calls can be enabled/disabled.
- SIP Call: Supports two SIP accounts for registration. SIP server and outbound proxy server settings are configurable, including registration period and backup server IPs.
- Calling Features: Includes IP Broadcast Key (for FT600K), Do Not Disturb (DND) with configurable return codes and on/off codes, Speed Dial (up to 8 numbers), Web Call (making calls from the web interface), and Dial Option (replacing long numbers with shorter ones).
- Auto Answer: Configurable delay (0-5 seconds) and mode (video or audio) for automatic answering of incoming SIP/IP calls.
- Multicast: Allows the door phone to act as a listener and receive audio from a multicast group, with configurable paging barge priority.
- Maximum Call Duration: Sets the maximum dial-in and dial-out time before a call is automatically hung up.
- Hang Up After Open Door: Automatically hangs up a call after the door is opened, with a configurable timeout (1-15 seconds).
- Audio & Video Codec Configuration: Supports PCMU, PCMA, G729, G722 audio codecs and H264 video codec. Video resolution, framerate, and bitrate are configurable for both general and IP direct calls.
- DTMF Data Transmission: Configurable DTMF mode (Inband, RFC2833, Info+Inband, Info+RFC2833) and payload for door access and third-party integration.
- Relay Setting: Supports two relay switches for door access control. Configurable relay ID, type (Default/Invert State), mode (Monostable/Bistable), delay (1-60 seconds), and DTMF options (1-4 digits). Web relay settings allow control of door access via network-based web relays. A white list can be configured for door relay access via DTMF.
- Door Access Schedule Management: Create daily, weekly, and normal schedules for door access, with configurable date and time ranges.
- Door Unlock Configuration: Supports PIN code access. Open relay via HTTP allows remote door unlocking by typing a specific HTTP command (URL) in a web browser.
- Exit Button Configuration: Configurable input service (Enabled/Disabled) and trigger options (FTP, Email, SIP Call, HTTP) for the exit button.
- PIN Code for Door Unlock: Public and private PIN codes can be configured, with an admin code to change the public key. Private PIN codes can be linked to access schedules.
- Security: Tamper alarm settings (gravity sensor threshold) are configurable. Client and Web Server Certificates can be uploaded for secure communication.
- Integration with Third Party Device:
- Wiegand: Configurable Wiegand type (26, 34, 58), transfer mode (Input/Output/Convert to Card No.OutputWiegand), input/output data order, and CRC for integration with Wiegand devices.
- HTTP API: Configurable HTTP API settings with various authentication modes (None, WhiteList, Basic, Digest) for third-party integration.
- Milestone: Integration with Milestone surveillance system can be enabled.
Maintenance Features:
- Monitor and Image: RTSP stream monitoring allows third-party devices to obtain real-time audio/video. MJPEG image capturing is also supported.
- Logs: Call logs (dial-out, received, missed) and door logs (name, code, type, date, time, status) are available for review and export.
- Debug: System logs can be exported to a local PC or remote server for debugging, with configurable log levels (1-7). Remote debug server settings are available. PCAP (Packet Capture) allows capturing network data for troubleshooting.
- Firmware Upgrade: Firmware can be upgraded via the web interface by uploading a .rom file.
- Backup: Configuration files can be imported from or exported to a local PC.
- Auto-provisioning: Supports DHCP, PNP, TFTP, FTP, HTTPS protocols for batch configuration and firmware upgrades from third-party servers using general or MAC-based configuration files. Autop schedules can be set for automatic provisioning. Static provisioning allows manual URL setup for firmware/configuration file downloads.
- Password Modification: Web interface passwords for admin and user accounts can be changed.
- System Reboot & Reset: The device can be rebooted or reset to factory settings via the web interface.
Need help?
General
To Next Page
