16.2. Remote Debug Server
Remote debug server is used to access the log remotely for debugging purpose.
On the web,\. Navigate to Intercom > Advanced > Remote Debug Server.
Parameter Set-up:
⚫ Service: disable or enable the remote debug server.
⚫ Connect Status: displays the remote debug server connection status.
⚫ IP: enter the remote debug server IP address.
⚫ Port: enter the remote debug server port.
16.3. PCAP
PCAP in Fasttel door phone is used to capture the data package going in and
out of the devices for debugging and troubleshooting purpose. You can set up
the PCAP on the device web Upgrade > Advanced > PCAP interface properly
before using it.
To Next Page
Loading...
