⚫ Port: set up SIP server port for data transmission.
⚫ Registration Period: set up SIP account registration time pan. SIP re-
registration will start automatically if the account registration fails during
the registration time span. The default registration period is “1800”, ranging
from 30-65535s.
9.2.3. Configure Outbound Proxy Server
An outbound proxy server is used to receive all initiating request messages and
route them to the designated SIP server in order to establish call session via
port-based data transmission. To set it up on the device web Account > Basic >
Outbound Proxy Server Interface.
Parameter Set-up:
⚫ Enable Outbound: click “Enable” and “Disable” to turn on or turn off the
outbound proxy server.
⚫ Preferred Server IP: enter the SIP address of the primary outbound proxy
server.
⚫ Port: enter the Port number to establish call session via the primary
outbound proxy server
⚫ Alternate Server IP: set up Backup Server IP for the backup outbound proxy
server.
⚫ Port: enter the port number for establishing call session via the backup
outbound proxy server.
To Next Page
Loading...
