In this example #1234# will activate relay 1 and #4444# relay 2. #5555# will
activate as well relay 1 as webrelay 1 at the same time.
13. Security
13.1. Tamper Alarm Setting
Tamper alarm function serves as a protection against any unauthorized
removal of the devices by triggering off the temper alarm while sending out
calls to the designated location. Tamper alarm will be triggered off when the
door phone changes its gravity value as opposed to its original gravity value set
up when the device is installed. To do this configuration on the web Intercom >
To Next Page
Loading...
