interface for the door access, intercom, monitoring, alarm, etc. It is a
convenient tool for property managers to manage, operate and maintain
the community.
4. None: for connection on external third party sip server
4. Access the Device
FT600(K) SIP series system setting can be accessed on the device web
interface.
4.1. Obtain Device IP Address
Searching the device IP by the IP scanner in the same LAN network. Just click
Scan tab in the IP scanner to check the device IP. Search for its mac address or
as manufacturer “Smart Doorphones”.
Alternative:
FT600SIP: press the call button for about 5 seconds and a voice will announce
the ip address through loudspeaker.
FT600KSIP: press *3258* and a voice will announce the ip address through
loudspeaker.
4.2. Access the Device Setting on the Web
Interface
Enter the device IP address on the web browser in order to log in to the device
web interface where you can configure and adjust parameters, etc. The initial
user name is “admin” and password “Fasttel123!” and please be case-sensitive
to the user names and passwords entered.
To Next Page
Loading...
