8.2. Device Network Configuration
You can check for the door phone’s network connection info and configure the
default DHCP mode (Dynamic Host Configuration Protocol) and static IP
connection for the device on the device web Network > Basic interface.
Parameter Set-up:
⚫ DHCP: select the DHCP mode by moving the toggle switch to the right.
DHCP mode is the default network connection. If the DHCP mode is turned
on, then the door phone will be assigned by the DHCP server with IP
address, subnet mask, default gateway and DNS server address
automatically.
⚫ Static IP: select the static IP mode by checking off the DHCP check box.
When static IP mode is selected, then the IP address, subnet mask, default
gateway, and DNS servers address have to be manually configured
according to your actual network environment.
⚫ IP Address: set up the IP Address if the static IP mode is selected.
⚫ Subnet Mask: set up the subnet Mask according to your actual network
environment.
⚫ Default Gateway: set up the correct gateway default gateway according to
the IP address of the default gateway.
⚫ LAN DNS1/2: set up preferred or alternate DNS Server (Domain Name
Server)according to your actual network environment. Preferred DNS
server is the primary DNS server address while the alternate DNS server is
the secondary server address and the door phone will connect to the
To Next Page
Loading...
