3. Introduction to Configuration Menu
⚫ Status: this section gives you basic information such as product
information, Network Information, and account information, etc.
⚫ Intercom: this section covers RTSP, MJPEG, ONVIF, Live stream, access
codes
⚫ Account: this section concerns SIP account, SIP server, proxy server,
transport protocol type, audio&video codec, DTMF, session timer, etc.
⚫ Network: this section mainly deals with DHCP&Static IP setting, RTP port
setting, and device deployment, etc.
⚫ Phone: this section covers Intercom settings, Call Log, etc.
⚫ Upgrade: this section covers Firmware upgrade, device reset&reboot,
configuration file auto-provisioning, fault Diagnosis.
⚫ Security: this section is for Password modification.
⚫ Mode selection :
1. Discovery mode: It is a plug and play configuration mode. Fasttel devices
will configure themselves automatically when users power on the devices
and connect them to the network. It is a super time-saving mode and it will
greatly bring users convenience by reducing manual operations. This mode
requires no prior configurations previously by the administrator.
2. Cloud mode: Fasttel Cloud is an all-in-one management system. Fasttel
Cloud is a mobile service that allows audio, video, remote access control
between smart phones and Fasttel intercoms. All configurations in the
device will be issued automatically from cloud. If users decide to use
Fasttel cloud, please contact Fasttel technical support, and they will help
you configure the related settings before using it.
3. SDMC mode: SDMC (SIP Device Management Controller) is a simple and
comprehensive software for building management. It provides a
topography for a community while offering you a graphical configuration
To Next Page
Loading...
