EasyManua.ls Logo

FAURE FFQ27908 - Care and Cleaning; Notes on Cleaning; Stainless Steel or Aluminium Appliances; Pyrolysis

FAURE FFQ27908
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Food Quantity Tempera-
ture (°C)
Time (min) Shelf posi-
tion
Pieces (g) 1st side 2nd side
Vegetable
gratin
- - 200 20 - 25 - 3
Scallops - - 200 15 - 20 - 3
Mackerel 2 - 4 - 200 15 - 20 10 - 15 3
Fish slices 4 - 6 800 200 12 - 15 8 - 10 3
Care and cleaning
Warning! Refer to Safety chapters.
Notes on cleaning
Clean the front of the appliance with a soft cloth with
warm water and a cleaning agent.
To clean metal surfaces, use a usual cleaning
agent.
Clean the appliance interior after each use. Fat
accumulation or other food remains may result in a
fire. The risk is higher for the grill pan.
Clean stubborn dirt with a special oven cleaner.
Clean all accessories after each use and let them
dry. Use a soft cloth with warm water and a cleaning
agent.
If you have nonstick accessories, do not clean them
using aggressive agents, sharp-edged objects or a
dishwasher. It can cause damage to the nonstick
coating.
Stainless steel or aluminium appliances
Clean the oven door with a wet sponge
only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive
materials as they can damage the oven
surface. Clean the oven control panel
with the same precautions.
Pyrolysis
Caution! Remove all accessories.
Do not start the Pyrolysis if you did not
fully close the oven door. In some
models, the display shows "C3" when
this error occurs.
Warning! The appliance becomes very
hot. There is a risk of burns.
Caution! If there are other appliances
installed in the same cabinet, do not use
them at the same time as the Pyrolysis
function. It can cause damage to the
appliance.
1. Remove the worst dirt manually.
2. Clean the inner side of the door with hot water, so
that the residues do not burn from the hot air.
3. Set the Pyrolysis function. Refer to "Oven
functions".
4. flashes.
You can use the End function to delay the start of
the cleaning procedure.
During the Pyrolysis the oven lamp is off.
After 2 seconds the procedure starts. Time of the
procedure: 2 h.
When the oven is at its set temperature, the door locks.
The display shows the symbol and the bars of the
heat indicator until the door unlocks.
Cleaning reminder
To remind you that the Pyrolysis is necessary, PYR
flashes in the display for 10 seconds after each
activation and deactivation of the appliance.
The cleaning reminder goes out:
after the end of the Pyrolysis
function.
if you press and at the same
time while PYR flashes in the
display.
15

Related product manuals