FBII XL-2 User Manual

Displays zone status (ALARM, BYPASS, TROUBLE, NOT READY).

Indicates system armed/disarmed and communication failure.

Indicates system armed with interior zones bypassed.

Confirms system readiness for arming.

Steps to arm the system with user code.

Explains why system cannot be armed.

Steps to disarm the security system.

Explains system state post-disarm.

Arms system, bypasses interior zones.

How to silence signals and clear displays.

Arms system, eliminates entry delay.

Steps to arm in Instant-Stay mode.

Steps to bypass zones not ready or faulty.

How bypassed zones are indicated on keypads.

Steps to add or modify users.

Steps to remove user codes.

Arms system without user code via #1.

Arms system bypassing zones using # key.

Diagram showing recommended smoke detector placement.

Steps for creating a fire escape plan.

Steps to test the alarm system.

Steps to test the backup battery.

Advice on minimizing radio/TV interference.

Troubleshooting communicator issues.

How intruders may bypass sensors and limitations.

Reasons smoke/motion detectors may fail.

Interference to wireless signals and power dependency.

Effectiveness of sirens/horns in waking people.

Risks of line failure and electronic component failure.

Importance of maintenance and not replacing insurance.

Details of warranty, exclusions, and liabilities.

Seller's maximum liability for damages.

Fields for owner's name, address, phone.

List of emergency contacts.

Fields for alarm installation company.