Need help?Do you have a question about the FBII XL4612RM and is the answer not in the manual?
General| Brand | FBII |
|---|---|
| Model | XL4612RM |
| Category | Security System |
| Language | English |
Important notice for system owners, not to be removed by anyone except occupant.
Displays the current status of each protection zone with specific indicator patterns.
Shows system armed/disarmed status and readiness for arming.
Indicates AC power, low battery, and potential telephone line failure.
Displays the status of each zone using LEDs or an LCD.
Details READY, ARM/DISARM, STAY, INSTANT, AC, BAT, and COM indicators.
Indicates if the system is ready to be armed, typically with the READY light ON.
Steps to arm the system, including entering a user code and exit delay.
Explains how to identify and resolve zones preventing system arming.
Steps to disarm the system using the user code.
How the system displays and handles alarms or troubles after disarming.
Resets specific security components after activation.
Arms perimeter zones while deactivating interior zones for safety.
Arms the system, eliminating entry time delays for immediate alarm.
Arms system with interior zones bypassed and entry delay suspended.
Eliminates specific zones from activating the system.
Removes a previously bypassed zone from its bypassed state.
Process for adding or modifying user codes and access levels.
Steps to remove user codes from the system.
Initiates Panic, Fire, or Auxiliary signals via key presses.
Special codes for sending silent alarms or arming only.
Commands to arm the system quickly without a user code.
Commands to set the system time and view zone descriptors.
Sets a programmed time for the system to automatically arm daily.
Enables keypad beeps for zone activity and displays current time.
Recommended placement for smoke detectors for effective fire detection.
Weekly procedure to test the alarm system's functionality.
Steps to test the backup battery's operational status.
To Next Page
