Fbt HiMaxx - General Features; HiMaxX 40 a;40 Bi-Amplified Features; HiMaxX 40 a;40 Passive Features

- Woofer B&C custom FBT da 320mm al neodimio con bobina da 75mm
- Driver a compressione B&C con bocca da 25mm e bobina da 44mm
- Amplificatore LF da 1000W RMS
- Amplificatore HF da 250W RMS in Classe G
- Pannello di controllo completamente ridisegnato con:
.funzioni di gain e volume accorpati
.ingresso mic/line XLR-jack commutabile e link XLR
.ingresso ausiliario RCA stereo con volume separato
.controlli di tono a 3 bande
.ground lift
.led di diagnostica
- Box impilabile
- Amplificatore consigliato 500W RMS
- Crossover passivo interno con protezione "soft trip" su woofer e driver
- Connettori speakon NL4 Neutrik
- B&C custom FBT designed 12" neodymium woofer with 3" voice coil
- B&C 1" compression driver with 1.7" voice coil
- 1000W RMS PWM LF power amplifier
- 250W RMS Class G HF power amplifier
- Control panel with:
.gain and volume functions in a single potentiometer
.Combo XLR/jack input - XLR link
.mic/line selection
.Independent RCA input channel
.3-band eq.
.ground lift
.diagnostic leds
- Enclosure suitable for stacking
- Recommended amplifier 500W RMS
- Passive crossover filter featuring "soft trip" on woofer and driver
- NL4 Neutrik speakon connectors