Fbt HiMaxx - HiMaxX 60 a;60 Bi-Amplified Features; HiMaxX 60 a;60 Passive Features

- Woofer B&C custom FBT da 380mm al neodimio con bobina da 75mm
- Driver a compressione B&C con bocca da 36mm e bobina da 64mm
- Amplificatore LF da 1100W RMS PWM
- Amplificatore HF da 250W RMS in Classe G
- Pannello di controllo completamente ridisegnato con:
.funzioni di gain e volume accorpati
.input e link XLR
.controlli di tono a 3 bande
.ground lift
.led di diagnostica
- Amplificatore consigliato 700W RMS
- Crossover passivo interno con protezione "soft trip" su woofer e driver
- Connettori speakon NL4 Neutrik
- B&C custom FBT designed 15" neodymium woofer with 3" voice coil
- B&C 1.4" compression driver with 2.5" voice coil
- 1100W RMS PWM LF power amplifier
- 250W RMS Class G HF power amplifier
- Control panel with:
.gain and volume functions in a single potentiometer
.XLR input and XLR link
.3-band eq.
.ground lift
.diagnostic leds
- Recommended amplifier 700W RMS
- Passive crossover filter featuring "soft trip" on woofer and driver
- NL4 Neutrik speakon connectors