A telltale will illuminate in the instrument
cluster display when these lights are on.
Pushing the switch a second time will turn
the lights off.
The bed lights will turn on for approximately
60 se
conds when a key fob unlock button is
pushed, as part of the Illuminated Entry
feature.
TAILGATE
THREE-POSITION
TAILGATE
The vehicle’s tailgate can be set to three
positions: open, mid, or closed. The tailgate
is dampened to provide a slower, more
controlled lowering.
To use the mid position, open the tailgate
and l
ower it to near mid position. Secure the
tailgate in this position by looping the tail
-
gate straps behind the circular retainer on
the b
ox sides.
Tailgate In Mid Position
NOTE:
Three 2x4 boards are needed to provide
suppo
rt at the two forward locations when
hauling cargo using the mid position and the
tailgate.
TONNEAU COVER
REMOVING THE TONNEAU
COVER
To remove the Tonneau Cover, proceed as
follows:
1. Open the tailgate to access the red
Tonneau Cover release straps, and pull
either one to disengage the locking
mechanism.
2. R
oll the Tonneau Cover forward, starting
with
the rear bar and continue to roll
toward the front of the truck bed.
3. Using the stowage straps, secure the
Tonn
eau Cover in the rolled up position.
4. Using a #T50 Tor
x head driver, remove
the two fasteners securing the Tonneau
Cover to the front of the truck bed.
5. Utilizing two people, lift the Tonneau
Cove
r up and away from the truck bed.
INSTALLING THE TONNEAU
COVER
To Install the Tonneau Cover, proceed as
follows:
1. Position the rolled up Tonneau Cover on
the truck bed and align it to the two
fastener locations at the front of the bed.
2. Using a #T50 Tor
x head driver, secure
the fasteners to the bed.
To Next Page
Loading...
