To Next PageTo Next Page
Need help?Do you have a question about the FDC FD-450A and is the answer not in the manual?
Explains icons and their meanings on the LCD screen.
Instructions for attaching the antenna to the transceiver.
How to turn the device on/off and adjust volume.
Steps for making a transmission and understanding status indicators.
Explanation of VFO/MR and Channel Only modes.
General usage tips, including aborting menus and confirming settings.
How to adjust the squelch level for noise reduction.
Procedure to select between high and low power output.
How to initiate an automatic scan of frequencies or channels.
Instructions for manually scanning frequencies or channels.
How to control the LCD backlight (ON/OFF/AUTO).
How to enable or disable audible key press feedback.
How to activate automatic keypad locking to prevent accidental presses.
Setting the maximum transmission duration to prevent continuous keying.
Setting the frequency offset for duplex (repeater) operation.
Configuring CTCSS/DCS codes for receiving signals.
Configuring CTCSS/DCS codes for transmitting signals.
Manually locking and unlocking the keypad.
Selecting between simplex and duplex operating modes.
Reversing the transmit and receive frequencies in duplex mode.
Steps to store frequencies and settings into memory.
How to recall and use stored memory channels.
Instructions to activate/deactivate the channel-only operating mode.
Procedure to remove a single stored memory channel.
How to perform a factory reset and erase all stored data.
General| Brand | FDC |
|---|---|
| Model | FD-450A |
| Category | Transceiver |
| Language | English |
