Feather FOLD - Fitting the Battery; Inserting the Battery Box; Removing the Battery Box

To Next Page

To Previous Page

Scooterpac Feather Fold | User Manual 18

9 Fitting the Battery

9.1 Inserting the Battery Box

To insert the battery box, simply place it into position and push forwards as shown below, [Fig 9.1.0] gently lowering into

position. Make sure the rubber protector flap remains on top of the battery box.

9.2 Removing the Battery Box

To remove the battery box, push the box forwards against the sprung connectors and then lift to release the box.

Fig 9.1.1