Noah H igh Sl eep er
IMPORTANT READ CAREFULLY – RETAIN FOR FUTURE REFERENCE
Thank you for buying the Noah H igh Sl eep er
• Please take a few quite minutes to read these instructions
• It is recommended that this product is assembled by two adults.
• This product contains small parts, keep small children clear of the assembly area
• Lay out the parts on a clean, flat surface and compare with the parts checklist. Save all packaging until
assembly is complete to avoid accidentally discarding fittings
PRODUCT SAFETY
• Recommended Mattress Size: 190cm x 90cm. The thickness should not exceed the line marked on the
upper end when assembled as a bunk
• Do not allow children to jump on the bunks. Using this furniture other than for its intended purpose
could cause damage to the structure or serious injury to your child
• Be aware of the danger of young children (under 6) falling from the upper bunk
• All assembly fastenings should always be tightened properly and care should be taken that no fittings
are loose
• Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints, missing parts or
sharp edges. Do not use bunk bed if any parts are missing or broken
• Always use the ladder for entering and leaving the upper bunk
• Never attach or hang items to any part of the bunk bed that are not designed for use with the bed
• This product has passed EN 747-1:2007
PRODUCT CARE
• Wipe clean using a soft damp cloth followed by dry cloth
Do not use abrasives or cleaning products which may contain ammonia or solvents
• Take Care when handling or moving the furniture. Careless handling can damage furniture, try to lift
rather than drag
TOOLS REQUIRED
• Please use Philips Head Screwdriver (not included) and Allen key part F, J (included) to assemble the
Noah High Sleeper
To Next Page
Need help?
General
