IMPORTANT READ CAREFULLY RETAIN FOR FUTURE REFERENCE
Noah Storage System
Thank you for buying the Noah Storage System
• Please take a few quite minutes to read these instructions
• This product contains small parts, keep small children clear of the assembly area
• Unit B have the option of flipping around the blackboard and cork board in the front panel.
PRODUCT SAFETY
• All assembly fastenings should always be tightened properly and care should be taken that no fittings
are loose
• These assembly instructions show every unit in the range, but can also be assembled in different
combinations with fewer units’.
• It is not advisable to stack the tower too high, for safety reasons’.
• We recommend that you use the anti-tipping kit provided in order to prevent the unit and its contents
from becoming a hazard. Affix part (I) to the top of the unit as indicated in the diagram and then use your
appropriate wall fixing to attach (I) to the wall. When positioning the bracket please take into consideration
the distance from the wall e.g. skirting board. You will need to use an appropriate wall plug and screw for
your wall type. If unsure please consult a professional
• Periodically check and ensure that all components are in their proper position, free from damage, and
that all connectors are tight.
PRODUCT CARE
• Wipe clean using a soft damp cloth followed by dry cloth
• Do not use abrasives or cleaning products which may contain ammonia or solvents
• Take Care when handling or moving the furniture. Careless handling can damage wooden furniture, try
to lift rather than drag
TOOLS REQUIRED
• Please use Philips Head Screwdriver (not included) and Allen key part G (included) to assemble the
Noah storage system
To Next Page
Need help?
General
