FEDCO MSS-40 - Page 2

MSS
TM
Series
© Copyright 2022 Fluid Equipment Development Company | www.fedco-usa.com
- 2 -
FEDCO Certications
ISO 9001 and ISO 14001:
FEDCO has adopted the ISO 9001 standard to dene and develop our Quality Manage-
ment System (QMS.) The QMS allows FEDCO to better serve our customers’ needs
through continuous improvement of the quality, delivery, and e󰀩ciency of our products.
3 FEDCO U.S.A. is ISO 9001:2015 certied.
FEDCO has adopted the ISO 14001 standard to dene and develop our Environmental
Management System (EMS) to better protect our environment.
3 FEDCO U.S.A. is ISO 14001:2015 certied.
ISO
14001:2015
REGISTERED
ISO
9001:2015
REGISTERED
CE Stamp:
CE marking conrms that specic products are in compliance with European Union
requirements. This allows FEDCO’s product lines to be sold throughout the European
Economic Area. Most FEDCO products can be provided with the CE mark.
NOTES: It is illegal to operate equipment in an EU member state if the manual(s) is not
written in that State’s language, Contact FEDCO if a translation is needed.
Compliant Test Systems:
Performance acceptance testing of FEDCO pumps and energy recovery devices are
measured using procedures and instrumentation tested by a third party NSF® auditing
company to be in accordance to the Hydraulic Institute’s H.I. 14.6 standards for cen-
trifugal pump testing and data recording.
www.fedco-usa.com