/
INSTALLATION"]
BEFORE YOU START J
Important information
• Keep this instruction manual for future reference.
• Do not start a damaged unit.
• The assembly and connection of the unit must be carried
out according to the instructions. If they are not
followed you run the risk of voiding the warranty.
• The power cord is located in the rear of the unit.
• Do not allow contact between the unit and water.
• Do not cover the air discharge or air intake louvers of
the unit.
• Proper venting of the air to the exterior is required at
all times.
Description of Parts on the
Portable Cooling Unit
Control
Panel
Air Outlet
Front Panel
Handle
Caster
Air Intake
Exhaust Port
¢ial Plate
Cord
Drain Valve
3
To Next Page
Loading...
