Need help?Do you have a question about the Federal Signal Corporation Pathfinder and is the answer not in the manual?
General| Brand | Federal Signal Corporation |
|---|---|
| Model | Pathfinder |
| Category | Security Sensors |
| Language | English |
Crucial safety instructions for installers covering qualifications and sound hazards during installation.
Essential safety precautions for operators regarding system use, hazard awareness, and cautious driving.
Details on siren tones, PA capabilities, and speaker configurations supported by the Pathfinder system.
Information on compatible lightbars and control features for the SignalMaster system.
How the Pathfinder integrates with vehicle systems via CAN bus and specific cables for data access.
Overview of the 12 solid-state relays and their programmable current limits for custom functions.
Details on four general purpose and dedicated input circuits for custom configurations and signals.
Explanation of control head LEDs and diagnostic features for system status monitoring.
Technical specifications including input voltage, operating temperature range, and physical dimensions.
Technical details for speakers, operating current, frequency range, and siren tone compliance standards.
Specifications for the 12 available solid-state relays, including current ratings and activation types.
Lists all parts included in the PF200 and PF200R kits with corresponding part numbers.
Important safety and procedural guidelines for vehicle wiring installations, including drilling precautions.
General steps for preparing the vehicle and connecting system components to the amplifier/relay module.
Details on the two serial ports used for communication with Federal Signal Network devices.
Explanation of the twelve solid-state relay outputs and their programmability for various functions.
Description of the four general purpose inputs and their software-configurable detection modes.
Functionality and configuration of the park input circuit for muting siren functions and white lights.
Instructions for enabling siren control via the vehicle's horn ring, including relay requirements.
Guidance on connecting one or two speakers, including impedance, wattage, and phase for dual tones.
Information on diagnostic LEDs for detecting speaker faults and monitoring amplifier output status.
How to use the Radio Re-Broadcast feature to amplify two-way radio messages over siren speakers.
Details on interfacing with the vehicle's CAN bus for accessing vehicle data and events.
Configuration of the ignition input for turning the Pathfinder system on/off and managing power.
Instructions for connecting the system to the vehicle's battery, including fuse and terminal recommendations.
Step-by-step guide for securely mounting the main siren unit using provided hardware and brackets.
Instructions for mounting the remote control head unit, including bracket assembly and angle adjustment.
Steps for applying legends to the control head buttons to identify their functions accurately.
Guidance on providing the safety message card to system operators for review and reference.
Instructions for placing safety labels in visible vehicle areas, avoiding critical zones like airbags.
Detailed steps for safely replacing the slide switch on the control head assembly.
Information on how to obtain technical assistance and service from Federal Signal Corporation.
Procedures and required information for returning products to Federal Signal for service or repair.
To Next Page
