EasyManua.ls Logo

Federal Signal Corporation SmartSiren Platinum SSP3000B User Manual

Federal Signal Corporation SmartSiren Platinum SSP3000B
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SmartSiren
®
Platinum
Installation and
Maintenance Instructions
25500151
A2 0815
Printed in U.S.A.
Model SSP3000B
Model SSP2000B

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Federal Signal Corporation SmartSiren Platinum SSP3000B and is the answer not in the manual?

Federal Signal Corporation SmartSiren Platinum SSP3000B Specifications

General IconGeneral
Power Supply12 VDC
TypeSiren
Operating Temperature-30°C to +60°C
CompatibilityCompatible with most vehicle electrical systems
Dimensions7.5"

Summary

Chapter 1: Safety Messages for Installers and Operators

Safety Messages to Installers of Sound/Light Systems

Provides essential safety instructions and precautions for installing sound/light systems.

Safety Messages to Operators of Sound/Light Systems

Offers critical safety guidance for operating sound and light warning systems.

Chapter 2: An Overview of the SmartSiren Platinum

Siren, PA, and Speakers

Details the siren tones, public address capabilities, and speaker compatibility.

Lightbars and SignalMaster Control

Explains compatibility with various Federal Signal lightbars and SignalMaster integration.

Chapter 3: Connecting the Convergence Network

Selecting Mounting Locations

Guides on choosing safe and appropriate mounting positions for system components.

Overview of Convergence Network Connections

Summarizes the types of connections for the Convergence Network system.

Preparing for Convergence Network Installation

Outlines preparatory steps for connecting the Convergence Network system components.

Connecting the Siren to the Battery

Provides instructions for making power connections from the siren to the vehicle battery.

Chapter 4: Setting the Gain for Radio Rebroadcast and PA

Setting the Gain for Radio Rebroadcast

Details how to adjust the volume level for radio rebroadcast.

Setting the Gain for Public Address (Microphone Volume)

Explains how to adjust the public address gain using controls on the module and head.

Chapter 5: Mounting the Siren and Control Head

Mounting the Siren Amplifier/Relay Module

Provides instructions and precautions for mounting the siren amplifier/relay module.

Mounting the Control Head

Details the process for mounting the control head using provided brackets and hardware.

Chapter 7: Testing the Convergence Network Installation

Chapter 9: Safety Messages to Personnel Servicing Federal Signal Electronic Sirens

Chapter 10: Servicing the Convergence Network System

Replacing the Slide Switch

Procedure for replacing the slide switch in the control head.

Servicing the Siren Amplifier/Relay Module

Overview of servicing procedures for the siren amplifier/relay module.

Getting Technical Support and Service

Information on obtaining technical assistance from Federal Signal.

Ordering Replacement Parts

Details on how to order necessary replacement parts.

Related product manuals