Chapter 7: Testing the Convergence Network
SmartSiren Platinum Convergence Network
52
Figure 7.7 LED indicators on lower label of siren amplier/relay module
RAD VOL: Screw for
adjusting the factory-
set radio volume.
5 A HORN: 5 A fuse for horn ring circuit.
SIREN 20 A: 20 A fuse for the siren.
PA VOL: Screw for adjusing the factory-
set public address volume. (For special
models with the microphone connected
to the siren amplier/relay module. This
feature is unavail for most models.)
ON: LED glows when
the network has power.