Federal Signal Corporation SmartSiren Platinum SSP3000B User Manual

Chapter 6: Setting Control Pad Options
SmartSiren Platinum Convergence Network
46
Resetting the Control Head to the Factory Default Conguration
To reset the operation and control of network devices to the factory default:
1. While in Program Mode, press Button 7 (Figure 6.1 on page 41).
2. To continue, select another setting to change or press Button 13 to exit Program Mode. Verify
that the last amber LED turns on when you exit.
Exiting Program Mode
To exit Program Mode
1. Press Button 13 (Figure 6.1 on page 41).
2. Verify that the last amber LED turns on when you exit.

Federal Signal Corporation SmartSiren Platinum SSP3000B Specifications

General

Brand	Federal Signal Corporation
Model	SmartSiren Platinum SSP3000B
Category	Security Sensors
Language	English