4. Installation in the vehicle
Pull the harness adjuster strap in the center slowly as in the picture ① for snug fitting so that the baby
feels comfortable in it.
Constant check is required as in the picture ② in order to avoid possible danger while baby is placed
on the seat..
Checking the correct
completion
Check the following points in order to secure maximum effect of car seat.
Both shoulder straps are firmly fastened with harness yoke.
Harness pad straps are firmly fastened with harness yoke.
Shoulder straps have passed through the slots of the same height.
Shoulder belt should not be twisted or loosened.
Warning
Check whether the position of the belt guide slot and the length of harness are adequate.
Check whether the harness is correctly fastened to the shoulder.
Failing to adjust in accordance with the above checkpoints may cause the baby bounced out of
the seat in a car crash.
Do not use the product more than one hour consecutively.
To Next Page
Loading...