2. Menu Operation Instruction
After the monitor is correctly connected to the power supply, the
indicator light is on (red), long press (manual power-on mode),
turn on the monitor, the indicator light turns yellow, and after the
HDMI signal is input, the indicator light turns green. (The default is
auto power-on mode, no need to long press buttons.)
(1). Touch screen menu operation (default touch screen is on)
①．
Double-click on the screen to open the main menu (on the left side of the
screen) and click on the corresponding menu to display the secondary
menu. You can enter the corresponding function option to select or set
with the "<" or ">" key of the option. To exit the menu, click outside the
menu to exit.
②．
Swipe up from the bottom of the screen to open the shortcut menu and click
on the corresponding menu to open or set the corresponding function.
Double-click the shortcut menu function and select the function setting
with the "<" or ">" key.
③．
On the left side of the screen (1/2 split screen), you can directly adjust the
brightness of the screen backlight; on the right side of the screen (1/2 split
screen), you can directly adjust the volume.
Figure:
To Next Page
Loading...
