Feelworld F5Pro - Page 17

16

Lut Switch
OFF, ON
After the LUT Switch is turned on, you can use the Lut (SLOG2,
SLOG3, LOGC, VLOG).
Lut Table
Show the 4 built-in Lut and the custom load Lut
Lut Import (type C)
After copying the 3D LUT file to the U disk and inserting
it into the TYPE-C to USB Connector, you can click the
“<” or “>” key in the Lut Import(type C) to import the 3D
LUT file.
Color Temp.
6500, 9300, User
Under the User, the red, green and blue of the image
can be adjusted.
Red
0～255
Green
0～255
Blue
0～255
Backlight
0～100
Pic. Mode
Standard, Mild, User, Dynamic
Under the User, you can adjust the image Brightness,
Contrast, Saturation, and Sharpness.
Brightness
0～100
Contrast
10～100
Saturation
0～100
Sharpness
0～100
Tint
0～100