Feelworld USB10X - Restore Default

20
VERSION
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
MCU Version 3.1.0 2019-09-26
Camera Version 1.0.5 2019-09-27
AF Version 1.0.0 2019-09-07
[↑↓]Select [← →]Change Value
[Menu]Back [Home]OK
MCU Version: Display MCU version information
Camera Version: Display camera version information
AF Version: Display the focus version information
3.3.6 Restore Default
Move the pointer to the (RESTORE DEFAULT) in the Main Menu, click the 【 HOME 】 and enter the (RESTORE
DEFAULT) as follow,
RESTORE DEFAULT
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Restore Default? NO
[↑↓]Select [← →]Change Value
[Menu]Back [Home]OK
Restore default: YES/NO. Color style and video format cannot be restored to factory default
Note: If the address of former remoter is not 1 but another one from 2, 3, 4, the corresponding camera address
will restore to 1 when all parameters or system parameters are restored. User should change the remoter
address to be 1 (press No.1 according to the camera so to get normal operation).