Need help?Do you have a question about the Fein KBU 35 PQ and is the answer not in the manual?
General| Power | 1100 W |
|---|---|
| Output | 550 W |
| Max drilling diameter in steel | 35 mm |
| Carbide tipped cutter max. | 35 mm |
| HSS core drill max. | 35 mm |
| Tapping | M 16 |
| Reaming max. | 16 mm |
| Total stroke range | 260 mm |
| Cable with plug | 4 m |
| Chuck type | Keyless |
| Chuck size | 1.5-13 mm |
| Max drilling diameter in wood | 80 mm |
| Weight according to EPTA | 9.5 kg |
| Drill capacity (steel) | 35 mm |
| Drill capacity (wood) | 80 mm |
Procedure for taking apart the main drill jig assembly.
Procedure for removing the drill motor from the unit.
Steps to remove the main motor housing.
Steps for removing the motor armature.
To Next Page
