Fein MSF 640-S - 4 1;2 Inch Angle Grinder; High Power Motor; FEIN Quick-In System; Compact Design and Weight

POLISHER
•Powerful and consistent torque
•Faster production
• Lightweight
Metal Polishing Accessories
3 30 22 102 99 9 Metal Polishing Set
3 01 09 114 99 9 Short Arbor
3 01 09 117 99 9 Long Arbor
4 20 03 000 99 9 Hex Nut
3 30 21 102 02 2 Handle
3 02 29 216 00 5 Hand Guard
•Variable speed
•Self-start lock
•Ergonomic design
• Spindle lock for wheel changes
7” AND 9” ANGLE GRINDERS
•High power motor with electronic
feedback for constant torque and
fast stock removal.
• Compact design. Weighs only 12
pounds for easy handling and
maneuverablilty.
• Self-start lock prevents uncon-
trolled starts following interruption
of power.
• Safety switch prevents accidental
start-up.
•Slow start prevents recoil or kick-
back when tool is started.
• Wheel guard is easily adjustable.
• 4-position rear handle.
• Spindle lock for
wheel changes.
4
1
⁄2" ANGLE GRINDER
•High power motor for high stock
removal performance.
• FEIN's "Quick-In" system for fast
wheel changes without tools.
• Compact design. Weighs only 3.4
pounds for easy handling and
maneuverablilty.
• Self-start lock prevents uncon-
trolled starts following interruption
of power.
• Safety switch prevents accidental
start-up.
•Slow start prevents recoil or kick-
back when tool is started.
•Wheel guard is easily adjustable
and non-removeable. For use with
non-hubbed grinding wheels.
Model: WSG 12-125 WSG 12-150
Input Watts: 1200 1200
Amps: 10.5 10.5
Speed, no load: 7,000 RPM 7,000 RPM
Power Cord Length: 13 feet 13 feet
Net Weight: 4.6 lbs. 4.6 lbs
Grinding Wheel: 5 in 6 in
Mounting Thread:
5
⁄8" x 11"
5
⁄8" x 11"
Precision
angle grinders
from FEIN.
Lightweight,
powerful,
compact.
Model: WSG 20-180 WSG 20-230
Input Watts: 2000 2000
Amps: 15 15
Speed, no load: 8,500 RPM 6,000 RPM
Power Cord Length: 13 feet 13 feet
Net Weight: 12 lbs. 12 lbs
Grinding Wheel: 7 in 9 in
Mounting Thread:
5
⁄8" x 11"
5
⁄8" x 11"
3 13 26 115 00 1 7" guard required for wheels with hubs
3 13 26 125 00 1 9" guard required for wheels with hubs
Model: WPO 12-27E
Input Watts: 1200
Mounting Thread:
5
⁄8" x 11"
Speed, No Load: 900-2700 RPM
Net Weight: 5.1 lbs
Model: Msf 640s
Input Watts: 650
Amps: 5.6
Speed, No Load: 11,000 RPM
Power Cord Length: 13 feet
Net Weight: 3.4 lbs
Grinding Wheel: 4.5 in
Backing Pad: 4.5 in
5” AND 6” ANGLE GRINDERS
•High power motor with electronic
feedback for constant torque and
fast stock removal.
• Compact design. Weighs only
5.2 pounds for easy handling
and maneuverablilty.
• Wheel guard is easily
adjustable.
• Self-start lock prevents uncon-
trolled starts following interruption
of power.
• Safety switch prevents accidental
start-up.
•Slow start prevents recoil or kick-
back when tool is started.
• Spindle lock for wheel changes.