Fein WSg 12-125 - User Manual

SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
and equipment necessary to per-form these repairs. Service or repairs performed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “Authorized Warranty Repair Centers”
Phone: 412-922-8886
Fax: 412-922-8767
Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
November 24, 2003
Angle Grinder
WSG 12-125 / WSG 12-150

Summary

Angle Grinder WSG 12-125;150

Service and Maintenance Guidelines

Tool service and maintenance must be performed by qualified personnel using identical FEIN replacement parts.

Locating Authorized Repair Centers

Contact FEIN by phone or website to find the nearest authorized repair center for service.

Parts Identification Diagram

FEIN Power Tools Parts List

Fein WSg 12-125 Specifications

General

Power	1200 W
Disc Diameter	125 mm
Cable Length	4 m
Spindle Thread	M14
Elastic backing pad diameter	125 mm