Fein WSG 14-125 - User Manual

3 41 01 088 06 0 • 11.07 • Abbildungen unverbindlich. Technische Änderungen vorbehalten. © C. & E. FEIN GmbH • Printed in Germany.
EN 60745, EN 55014, EN 61000-3-2, EN 61000-3-3;
98/37/EG, 89/336/EWG
Hammersdorf
Quality Manager
Dr. Schreiber
Manager of R&D department
FEIN Service
C. & E. FEIN GmbH
Hans-Fein-Straße 81
D-73529 Schwäbisch Gmünd/Bargau
Telefon 0 71 73/183 465
Telefax 0 71 73/183 844
www.fein.com
FEIN WSG 14-125
7 221 41
FEIN WSG 14-125 S
7 221 44
FEIN WSG 14-150
7 221 42
FEIN WSG 14-70 E
7 221 43
FEIN WSS 14-125
7 221 40
3 41 01 088 06 0 - Titel 297.fm Seite 1 Dienstag, 13. November 2007 3:20 15

Summary

For Your Safety

Special Safety Instructions

Detailed safety precautions for operating the power tool, covering protective equipment and handling.

Intended Use of the Power Tool

Defines the intended commercial use of the angle grinder and compliance with generator standards.

Kick-back Causes and Operator Precautions

Additional Safety Instructions for Cutting Operations

Safety advice focused on cutting operations, including avoiding jamming and kick-back.

Sanding Work Safety Instructions (Sanding Disc)

Safety guidelines for sanding operations using sanding discs, emphasizing correct disc selection.

Sanding Work Safety Instructions (Wire Brushes)

Safety advice for using wire brushes, including bristle hazards and guard usage.

Operating Instructions

Repair and Customer Service

Instructions for cleaning, maintenance, and replacing parts, plus customer service contact.

Warranty and Liability

Details on product warranty validity and manufacturer's guarantee conditions.

Declaration of Conformity

FEIN's declaration of product conformity with relevant standards and documents.

Environmental Protection and Disposal

Guidelines for environmentally friendly recycling of packaging and worn-out tools.

Fein WSG 14-125 Specifications

General

Brand	Fein
Model	WSG 14-125
Category	Grinder
Language	English