Feiyu Scorp-C - User Manual

Feiyu Scorp-C（FAQ）
1.
Q: What’s the maximum payload of the Feiyu Scorp-C？
A: The max payload is about 2500g (well balanced before powered on).
2.
Q: How much does the Feiyu Scorp-C weight? What’s the
build material of it?
A: Around 1200g（with quick release plate and built-in battery，without camera, lens
etc.）
Aluminium alloy and plastic.
3.
Q: The motors do not work after turning on the gimbal,
how to resolve it?
A: 1. Make sure to fully charge the gimbal before turning it on;
2. Make sure all the axis locks are unlocked, as shown in pictures below.

Summary

Feiyu Scorp-C Specifications and Basic Troubleshooting

Maximum Payload Capacity

Details the maximum weight the Feiyu Scorp-C can handle when properly balanced.

Gimbal Weight and Build Materials

Information on the Feiyu Scorp-C's weight and its construction materials.

Troubleshooting Non-Functional Motors

Steps to resolve issues where the gimbal motors do not activate.

Battery and Charging Details

Battery Life and Removability

Explains the operating time of the Feiyu Scorp-C's battery and if it is removable.

USB Charging Port and Time

Locates the USB charging port and estimates the time needed for a full charge.

Mobile Application Guide

Downloading and Using the Feiyu Scorp APP

Instructions on where to download the app and its primary functions.

Gimbal Balancing and Performance Issues

Resolving Gimbal Vibrations After Camera Switch

Steps to fix vibrations that occur after changing the mounted camera.

Tips for Balancing Heavy Cameras

Guidance on how to more easily balance heavier camera setups on the gimbal.

Control Button Functions Explained

Power Button Operations

Details the functions of the power button (on/off, sleep, wake).

M Button Functions and Modes

Explains how the M button switches modes and performs calibration.

Advanced Gimbal Controls

Shutter Button Functions

Describes the shutter button's actions: focus, record, and photo.

Trigger Button Functions

Details the trigger button's operations: reset, custom mode, selfie mode.

Multi-function Knob Operations

Explains the functions controlled by the multi-function knob.

System Information and Compatibility

Gimbal Centering and Leveling Issues

Troubleshooting steps for a gimbal that is not centered or level.

Wi-Fi Connection Support

Clarifies whether the Feiyu Scorp-C supports Wi-Fi connection with cameras.

Knob Mode Switching Button

Explains the function of the button used to switch knob control modes.

Camera Connectivity and Version Check

Panasonic Camera Connection Issue

Addresses problems switching between photo/video modes with Panasonic cameras.

Checking Gimbal Version Information

How to find the gimbal's firmware version using the companion app.

Final Specifications and Usage Limits

Battery Type and Charger Requirements

Specifies the battery used and requirements for the charging adapter.

Maximum Remote Control Distance

States the maximum distance for controlling the gimbal via smartphone.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Feiyu Scorp-C is a camera gimbal designed to stabilize cameras and provide various control functionalities.

Function Description:

The Feiyu Scorp-C gimbal is primarily used for stabilizing cameras during video recording and photography, ensuring smooth and steady footage. It offers multiple operational modes to suit different shooting scenarios, including Pan mode, Pan&Tilt mode, All Follow Mode, Flash Mode, and Lock Mode. Users can switch between these modes using the M button. The gimbal also features a multi-function knob for controlling pan, tilt, and roll axes, electronic zooming, and a follow focus motor. It can be controlled remotely via a smartphone app, which also allows for firmware updates and parameter adjustments.

Important Technical Specifications:

• Maximum Payload: Approximately 2500g (when well balanced before powering on).
• Weight: Around 1200g (including quick release plate and built-in battery, without camera, lens, etc.).
• Build Material: Aluminium alloy and plastic.
• Battery Type: Built-in 18650 battery, not removable.
• Battery Life: Approximately 13 hours.
• Charging Port: USB Type-C, located under the multi-function knob and above the trigger button.
• Charging Time:
  • Approximately 3 hours with a 5V-2A charging adapter.
  • Approximately 1.6 hours with fast charging up to 18W.
• Waterproof: Not waterproof.
• Camera Charging: Does not support charging the camera.
• Wireless Connectivity: Does not support WiFi connection with the camera.
• Remote Control Distance (Smartphone): Approximately 25 meters (dependent on smartphone Bluetooth signal strength).

Usage Features:

• Power Button:
  • Long press: Turns the gimbal on/off.
  • Single press (in sleep mode): Wakes up from sleep mode.
  • Double press: Enters sleep mode.
• M Button (Mode Switching):
  • Single press: Switches among Pan mode (default), Pan&Tilt mode, All Follow Mode, Flash Mode, and Lock Mode.
  • 5-time press: Initiates horizontal calibration. The Bluetooth indicator turns solid from flashing upon completion. Tap the M button to return to the working state.
• Shutter Button:
  • Half-press: Focuses the camera.
  • Single press: Starts/stops recording.
  • Long press: Takes a photo.
• Trigger Button:
  • Double press: Returns to the initial position (current mode remains unchanged).
  • Long press: Temporarily switches to a customized mode (default is Pan&Tilt mode, customizable via the Feiyu Scorp APP). Releasing the button returns to the previous mode.
  • Triple press: Activates Selfie mode (Pan axis turns 180°, and automatically switches to Pan Follow mode).
• Multi-function Knob:
  • Controls pan, tilt, and roll axes (in axis-control state).
  • Controls electronic zooming in/out.
  • Controls the Follow Focus motor.
• Knob Mode Switching Button:
  • Long press: Switches the knob functions between Electronic Follow Focus, Follow Focus, and axis control.
  • Single tap: Switches between Pan, Tilt, and Roll control (only when in axis control state).
• Camera Connection: When connecting with a compatible Panasonic camera via a DC2.5mm cable, the mechanical shutter release only supports binary signals and does not support switching camera modes. Users need to manually switch modes on the camera. The camera mode icon will not appear in this case.

Maintenance Features:

• Motor Auto Tune: If the gimbal vibrates after switching cameras, ensure the camera is tightly mounted and balanced. Then, press the Motor Auto Tune button for 5 seconds until a beep sound is heard. The motors will auto-tune and finish with another beep sound.
• Balancing Heavy Cameras: If it's difficult to move the arm or tighten the screw when balancing heavy cameras, hold up the arm slightly with one hand to reduce friction, making it easier to adjust and tighten. Release the arm once balancing is complete.
• Resolving Gimbal Issues (Not Centered, Drifting, Not Level):
  • Switch to "none-All follow mode," then tap the M button 5 times. When the Bluetooth indicator turns solid from flashing, calibration is complete. Tap the M button to return to the working state.
  • Alternatively, use the Feiyu Scorp APP to manually adjust the horizontal angle.
• Firmware Updates: The Feiyu Scorp APP can be used to update gimbal firmware.
• Parameter Adjustment: Gimbal parameters can be adjusted using the Feiyu Scorp APP.
• Version Information: To check the gimbal's version information, connect to the Feiyu Scorp APP, go to "More," and then "Firmware Info."

Feiyu Scorp-C Specifications

General

Brand	Feiyu
Model	Scorp-C
Category	Camera Accessories
Language	English