www.feiyu-tech.com 4
2. Start to Use
TIPS
(1) Please fully charge gimbal before power on for the rst time.
(2) If the power is too low, the indicator will ash red for three times every ve
seconds. It is recommended to charge it immediately.
(3) When not in use, please turn o the gimbal.
(4) Unlock pan axis position lock & roll axis position lock before using.
2.1 Charging
When charging with Micro USB cable, indicator keeps solid red. When fully
charged, the indicator keeps solid green.
2.2 Unlock / Lock
When the axes is lock, please turn the motor to left or right to unlock them with
the guidence of Lock & Unlock symbol.
To Next Page
Loading...
